Warning

The contents in this page are COPYRIGHTED. It is made available here for the convenience of licensed users of  WinTRiLOGI Version 3.xx to obtain upgrade to their existing software. If you are not a licensed WinTRiLOGI user please do not proceed any further.

Please follow the Download Procedure stated below to download the WinTRiLOGI software.

This new upgrade of WinTRiLOGI is designed to run on the latest, 32-bit Java Runtime Environment that may already be shipped with your PC. The launcher automatically searches the Windows Registry for the 32-bit version of the JRE even if both 32-bit and 64-bit JREs have been installed on the same PC. This version requires 32-bit JRE version that is >= 1.6. If your PC only has 64-bit JRE please download and install the latest 32-bit JRE from http://www.java.com

1)  Right click here: SetupWTL3.exe to save the program into a temporary directory.

2)  Run the "SetupWTL354.exe" to install the software to the existing TRiLOGI directory.

Legacy Version WinTRiLOGI 3.54

This previous release of WinTRiLOGI was designed to automatically invoke the Java JRE 1.4.2_19   to run the WinTRiLOGI program. To run this version please follow the link below to download and install JRE 1.4.2_19 before proceeding.

Also note that you can install JRE 1.4.2_19 even there is already a newer version of JRE on your PC. It will not overwrite the default settings assigned to the newer version. i-TRiLOGI will use JRE 1.4.2_19 even if there are other JRE present. Please install the JRE BEFORE installing the WinTRiLOGI.

1 ) Download and Install JRE 1.4.2_19

Please Install JRE 1.4.2 to the default folder
(i.e.  C:\Program Files\Java\j2re1.4.2_19   for earlier Windows
 or    C:\Program Files (x86)\Java\jre1.4.2_19 for 64-bit Windows 7)

2)  Right click here: SetupWTL354.exe to save the program into a temporary directory.

3)  Run the "SetupWTL354.exe" to install the software to the existing TRiLOGI directory.

Sep 28, 2008

Some users of Windows Vista complained of compatibility problem that resulted in the frequent breakdown of the serial communication when previous WinTRiLOGI version runs on Windows VISTA.  This release of Version 3.53 fixes this Vista problem.

This release also inform you of the reason if WinTRiLOGI could not start due to missing serial driver (often happen when Java JRE is upgraded).

Mar 30, 2005

The release fixes a number of new problem reported when users install the newer version of Java Runtime Environment JRE 1.4.2. These JRE related issues was not a problem when running JRE 1.3.1. However, since many new Windows XP are now shipped with JRE 1.4.2 we can no longer recommend installing JRE 1.3.1 as this usually result in a conflict when it overwrites registry of a PC pre-installed with JRE 1.4.2. In addition, SUN has started the EOL (End-of-line) for JRE 1.3.1 so most users are encouraged to upgrade to JRE 1.4.2.

In this release we have taken the step to fix these JRE 1.4.2 related problem. There are also some minor bug fixes to the ladder logic editor software. Some new features such as "Write Compiled Code to Disk" and some enhancement has been made to make the program easier to use.

Enhancement and New Features

1) If during ladder logic creation you picked an I/O without label name from the I/O table, the program will now prompt you to enter a label name, it will then update it on the I/O table and use it immediately (In previous version you must define the label name before they can be used).

2) Positioning of cursor at the junction of two parallel branches can now be achieved by clicking at the right end of the contact before the junction.

JRE 1.4.2 Related Problems

1)  Reloading of a ladder logic program that contain multi-lines "Comment" circuit from the harddisk resulted in a number of invalid circuits. This is due to JRE 1.4.2 default treatment of newline characters being different from JRE 1.3.1. This has been fixed and now multi-line "Comment" circuits can be saved and loaded properly. (The problem does not occur when you try to load a program created by TRiLOGI that runs under JRE 1.3.1, such as those in the samples folder)

2) <TAB> key can no longer be used to change the insertion point on the ladder logic "contact".  As such, the <SHIFT> key is now added to take the place of <TAB> key for the same action (JRE 1.4.2 "hijacks" the <TAB> key and does not report it to the application program, although <TAB> key can still be used in text editor or for changing focus in the Window system).

Other bug fixes

1) Resolved a problem that part of I/O or Comments circuit covered by Windows borders in some system.

2) Show the actual ID on the "On-monitoring" screen. Previously it shows only "01" even when the ID is not actually 01.

3) Picking of I/O label now work with keyboard immediately without having to use the mouse to focus it.

4) Corrected some kinky behavior during ladder circuit creation that sometime refuses the move the highlight bar to the contact or coil where the mouse click.

Sep 22, 2003

• This release support programming of new E10plus PLCs.
• Some minor bugs in WinTRiLOGI version 3.5 has been fixed.
• An FCS computation button has been  added to the Serial Port Setup screen to help you compute the correct FCS.

- First Beta release in July 25, 2003.

Download Procedure

1. Download JRE: Since Internet TRiLOGI is written completely in 100% pure Java 2, you will need to install the  Java 2 Virtual Machine (JVM) in your PC before the Internet TRiLOGI program can run. Sun Microsystems, Inc of California provides a Java Run-Time Environment (JRE) which can be downloaded from their website at the following link (download the US English Version):

http://java.sun.com/j2se/1.3/jre/download-windows.html   

Note: Please download the US English Version of the JRE 1.3.1 from the above website and install it into your PC. There are some reports that International version of JRE may give problems when attempt to open files from TRiLOGI.  Follow the on screen instructions to complete the installation. You may be asked to restart the computer.

2. Download the TRiLOGI Setup file as shown in the following link and install it into your PC. A new group "Windows TRiLOGI" will be added to your "Start" menu and you can use the software immediately upon completion of the installation:

SetupWTL3.exe (1.37 Mbytes)

Note: The Program was updated on :   Mar 30, 2005

3. Download  theTRiLOGI  Help File in PDF format. This is an archive of all the helps document in WinTRiLOGI 3.5. Note that these context-sensitive helps are also available anywhere in the program by pressing the <F1> key at any time:

WinTRiLOGI_Helps.pdf (430K bytes)