Posted ByCK on January 18, 2002 at 18:19:03:
In Reply to: TriLogi posted byMarius Constantin on January 18, 2002 at 09:59:01:
No, TRiLOGI does not support mutliple files in the same PLC memory. You can use two seperate files to test them separately and then combine them later by cut and paste from one file into another.
: I need to program a PLC that is linked to HMI. I have 2 "menus" to do: one cicle, and automatic cicle.
: There is about 20 inputs and 30 outputs. If I put all the ladder on the same file I think that will be hard to debug. Can I put the 2 program in independent files and download to the PLC at the different addresses?
: Thx