LOAD_EEP$ (addr)      {* Applicable only to PLC with firmware r44 or higher}
Purpose This function returns a string previously saved into the PLC's internal data EEPROM (or FRAM) using the "SAVE_EEP$" command.

addr - EEPROM address. Actual PLC may have less EEPROM space. Please refer to your PLC’s reference manual for the upper limit.
Examples     X$ = Load_EEP$(5)
    FOR I = 1 to 5
       $$[I] = Load_EEP$(I+10)
    NEXT
Comments 1. String saved in EEPROM string location #5 is loaded into X$
2. Strings saved in EEPROM string locations #11 to #15 are loaded into A$ to E$ ($$[1] to $$[5] represents A$ to E$)
See Also SAVE_EEP$ - for explanation of how the data EEPROM area are organized in the M-series PLC's to provide storage area for both integers and strings.

LOAD_EEP, SAVE_EEP

  backbutton.gif (507 bytes)  Basic to TBASIC Reference Manual